Tachyon has made a cooperation with TEXCO BOYA APRE TEXTILE which is a pioneer company in producing woven fabrics, and regenerated woven fabrics finishing such as Tencel, Modal, Viscose, Acetate, Floss, Cupro inTurkey.
As you know, in recent years there have been new searches especially in the use of cellulosic fibers. The challenging and costly processes of cotton production in the world led producers to seek different ways. For this reason, there has been a significant increase in the use of polyester, but people's interest in natural products, fiber use comfort cause cellulosic fibers to be more preferable in textile products in daily use. Difficulty in cotton production has increased our interest in the use of vegetable products such as viscose, modal, tencel, bamboo, cupra, linen, etc.by searching different cellulosic fibers. The fact that the marketing of these fibers are active in the world market has started to emerge because of certain features such as antibacterial and nature-friendly.
Especially the lingerie, stockings and bed linen manufacturers have increased their interest in these fibers. Almost all of the fibers we use daily, but elastane also took place seriously in the fibers. The comfort of use, the contribution of the fabric to wrinkle, elasticity, and comfort in the human body for reasons of almost all the fibers in certain rates became indispensable.
Of course, the rate of elestane in an athlete's tights can be more than 30%, while in a men's shirt it can be in 2-3%.
Such difficult, delicate, fragile fibers containing elestane brought about production difficulties in finishing plants. Conventional systems of machinery have inevitably made the production of these fibers difficult. Delicate cotton fabrics with fine thread count with regenerated materials and fine yarn counts brought problems with the machinery available in continuous processes in finishing plants. Particularly due to the characteristic of the fiber during the process, its quick brittleness also elongation has seriously rendered process and machine optimization inevitable.
As a new generation machine manufacturer, we try to find solutions to these problems by examining all the problems in the weave line and the weaving finishing/dyeing line.
With our years of experience, we are trying to find new generation needs with our completely R & D-and supported products by TUBITAK, and equip our machines with the latest technology and provide solutions to the manufacturers.
PLIVIA MAXIME DRUM is a special product designed to meet this need. It has an open drum system. The drum has a special design, equipped with special ducts and holes to allow water to circulate in the drum, allowing water to diffuse into the fabric. The same design is also used to create a turbulence effect, thus providing a mutual water burst effect. The washing effect was maximized by transferring 60,000 liters of water in the cabin to 60 m3 / hour in the cabin by means of water columns at the entrance and exit of the fabric.
The ballerinas are placed at 2 meter intervals at the entrance and exit points of the cabin and the tension control is kept on the fabric.
PLUVIA MAXIME DRUM is suitable for washing cotton fabrics, knitted fabrics, all regenerated fibers (tencel, viscose, rayon, modal, cupra, etc.), cellulose / polyester blended fabrics.
We will continue to produce the best machines in the world for you
